ISUZU A&S, member of the Isuzu Group, plans, develops, and sells genuine parts and accessories for Isuzu trucks, including BEST FIX maintenance parts.

The blue LED will give the front mask additional accent.

	Installation Time:1.6H
	Installation Time:1.6H

*Please install before affixing the ISUZU emblem.
*Additional connector harness(1-8672-4022-0) is required.
*Lighting Condition:Lights full when starter switch is [ON], lights dim when light switch is [ON].

The front line plate gives the front fascia a tougher, tighter image with sharp lines.

	Installation Time:0.1H
	Installation Time:0.1H

*Please install before affixing the ISUZU emblem.
*To install this front line plate under the original ISUZU emblem, the
position of the ISUZU emblem will be improper. A new ISUZU emblem
needs to be purchased additionally for replacement.

Creates a high-class, distinctively looking front.

●Old Grille

	Installation Time:0.3H　Weight:1.8kg
	Installation Time:0.3H　Weight:2.0kg

●New Grille

	Installation Time:0.3H　Weight:2.7kg
	Installation Time:0.3H　Weight:3.1kg

Sleek design integrated with the vehicle improves appeal and sense of presence.

	Installation Time:0.8H　Weight:15.5kg
	Installation Time:0.8H　Weight:16.5kg

*Cannot change from vehicle without air dam bumper.
*Cannot be installed on dump trucks and concrete mixer trucks.

For Bumper Head Lamp
Installation Time:0.8H　Weight:25.3kg

*Not available for FSS/FTS high-bed vehicles.

This bumper gives the frontal area a more striking look.

	Installation Time:0.8H　Weight:10.5kg

**Available only for bumpers without air dams.

The blue LED will stand out the "ISUZU" emblem.

	Installation Time:2.8H
	Installation Time:2.8H

*Additional connector harness(1-8672-4022-0) is required.
*To install the Illumination Front Line Plate together, dedicated
harness kit is required.
*Lighting Condition:Lights full when starter switch is [ON],
lights dim when light switch is [ON].

	Installation Time:1.5H　Weight:64.0kg With Tow Pin Installation Time:1.5H　Weight:70.5kg
	Installation Time:1.5H　Weight:65.4kg With Tow Pin Installation Time:1.5H　Weight:70.5kg

*Tested and certified by ISUZU Motors Limited as compatible
with the airbag system.

	With Tow Pin Installation Time:1.5H　Weight:135.9kg
	With Tow Pin Installation Time:1.5H　Weight:150.8kg
	Installation Time:2.0H　Weight:157.0kg With Tow Pin Installation Time:2.0H　Weight:168.9kg
	Installation Time:2.0H　Weight:164.4kg With Tow Pin Installation Time:2.0H　Weight:176.3kg

*Tested and certified by ISUZU Motors Limited as compatible
with the airbag system.

This mirror cover strongly accentuates the area around the mirrors.

	Sold separately (1unit) Right　Installation Time:0.5H Left 　Installation Time:0.5H

*Left/Right/Heated/Remote Control Variations are available.

This mirror cover strongly accentuates the area around the mirrors.

	Round 1unit　Installation Time:0.5H
	Square (for 3-mirror use) 1unit　Installation Time:0.5H

This mirror stay strongly accentuates the area around the mirrors.

	Sold separately (1unit) Right　Installation Time:0.5H Left 　Installation Time:0.6〜0.8H

*Left/Right/Heated/Remote Control Variations are available.

Adds sharp accents at both front edges of a pillar mirror vehicle for an upscale look.

	Sold separately for each right-side/left-side Right　Installation Time:0.8H　Weight:1.0kg Left 　Installation Time:0.9H　Weight:1.1kg For bumper headlights Sold separately for each right-side/left-side Right　Installation Time:0.5H　Weight:1.4kg Left 　Installation Time:0.6H　Weight:1.5kg *Can be installed on high-bed 4WD vehicles (with bumper headlights).

These lamp covers give the headlights a new image. Combine them with other chromed items to give the cab a tougher image.

	For Cab Headlight Vehicles Only Installation Time:0.2H

These door handle covers beautifully accentuate the door handles.

	Installation Time:0.5H

	Installation Time:0.5H

Combine them with other chromed items to give the truck’s profile a tougher, tighter image.

	Installation Time:0.4H
	For Setback Vehicles (For FV models) Installation Time:0.4H

Combine them with other chromed items to give the truck’s profile a tougher, tighter image.

	For Full Cabs Installation Time:0.3H For Short Cabs Installation Time:0.3H

Combine it with the Chromed Blister Fender Set to give the truck’s profile a tougher, tighter image.

	For FV models/High-bed 4WD (Bumper Headlight Vehicles) Installation Time:0.2H

The design is integrated with the Chromed Air Dam Bumper.

	Installation Time:0.6H

These covers give the turn signal lamps a sharper look.

	Installation Time:0.3H

Cannot be installed on FV models/High-bed 4WD.

These covers stylishly accentuate the wheel nuts.

	Front Six-Hole Pack (One Wheel) Installation Time:0.2H Rear Six-Hole Pack (One Wheel) Installation Time:0.2H

*Cannot be installed on some models.

This Chromed Center Cap is designed for aluminum wheel.
This will beautifully accentuate the undercarriage.

	Sold separately (1unit) For 17.5 Inch Front Installation Time:0.2H
	Sold separately (1unit) For 17.5 Inch Rear Installation Time:0.3H

*Cannot be installed on some models.

These leading-edge designs were created with a focus on harmony with the F-Series, as well as on differentiating our products from those of our competitors.

	17.5/19.5/22.5 Inch models available Installation Time:1.0H

*17.5 Inch model is for FRR, FSR, GSR.

These lights are linked with the running lights and illuminate the area under the cab at night.
This will make pedestrians and other vehicles around you more aware of your presence.

	Right and Left Set　Installation Time:1.5H

*Additional connector harness is required.
*The illuminated area depends on the items installed on the vehicle.